LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Scion >> 2016 >> iA Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Knock Sensor >> Inspection [07/2015 - ] >> Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection [07/2015 - ]: Procedure

  1. INSPECT KNOCK SENSOR 
    1. Resistance Inspection
      1. Disconnect the negative battery cable.

        Refer to REMOVAL [07/2015 - ]

      2. Remove the plug hole plate.

        Refer to REMOVAL [07/2015 - ]

      3. Remove the intake manifold.

        Refer to REMOVAL [07/2015 - ]

      4. Remove the KS.

        Refer to REMOVAL [07/2015 - ] 

      5. Measure the resistance between KS terminals 1 and 2.

        If not as specified, replace the KS.

        Refer to REMOVAL [07/2015 - ] 

        Specification (Reference)

        504 to 616 kilohms [10 to 30 °C (50 to 86 °F)]

        GTY484933Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals