Section 46 (Tools - 212 Chassis)
WARNING: This page does not describe the selected car, but rather 33 other vehicles, including the 2016 Mercedes-Benz E63 S AMG, 2016 Mercedes-Benz E400, 2016 Mercedes-Benz E350, 2016 Mercedes-Benz E300, and 2016 Mercedes-Benz E250. However, it is still accessible from the selected car via links, so may be relevant.
- Safety Precautions
- Shop-Made Tools
- Guard plate for radiator/condenser - WF58.50-P-0110-01A
- Protective plate for cooling module - WF58.50-P-0110-04A
- Pin for locking poly-V belt tensioning device - WF58.50-P-1325-02A
- Shell halves (2 ea.) for pressing off and caulking the inner constant velocity joint. - WF58.50-P-3530-01A
- Staking tool for securing joint hub on rear halfshaft - WF58.50-P-3530-07P
- Drift for releasing the fitting sleeves in the flexible couplings - WF58.50-P-4110-01A
- Template for calibration of reversing camera - WF58.50-P-5465-01EL
- Sheet metal crimping pliers for areas not easily accessible - WF58.50-P-6350-01SC
- Puller hook for lower part of clip on sliding/pop-up roof trim - WF58.50-P-7720-03A
- Screwdriver bit for actuator motor - WF58.50-P-8320-01A
- Shop-made tools: Passenger cars - WF58.50-Z-0998AZ