Wheel Alignment: SUBARU: Notes
- 6) Pull torsion bar out of trailing arm. Determine amount of turn necessary to make proper height adjustment and turn inner end of torsion bar to this value. Then, insert outer end of torsion bar to its proper adjusted position.
- 7) Install rear wheel and lower vehicle. Reattach lower end of shock absorber. Recheck vehicle rear ground clearance as originally measured. If correct, tighten lock bolt on outer trailing arm bushing. If incorrect, repeat adjustment.
RIDING HEIGHT SPECIFICATIONS
| Application | Specification In. (mm) | |
|---|---|---|
| 1600 | ||
| Sedan, Coupe Hardtop | 11.22-12.01 (285-305) | |
| Station Wagon | 12.20-12.99 (310-330) | |
| 4WD | 13.58-14.37 (345-365) | |