Transmission Assembly: Remove, Install, and Overhaul
WARNING: This page is about the GLF Automatic Trans, which is a different variant/trim than selected.
3 AND 4 SPEED TRANS
Includes: R&I Transaxle Assembly, inspect and replace necessary Transmission components and road test.| Applies To | Note | Standard Hours | Warranty Hours | Skill Level |
|---|---|---|---|---|
| FWD,3 Spd Trans | 9.8 | A | ||
| Additional Procedure: TRANSMISSION ASSEMBLY: Remove, Install, and Overhaul: | ||||
| Where Air Cond interferes add | 0.4 | A | ||
| Where Pwr Strg interferes add | 0.3 | A | ||
| Combination Procedure: CONVERTER BUSHING: Remove & Replace: | ||||
| 0.7 | B | |||
| Combination Procedure: CONVERTER SEAL: Remove & Replace: | ||||
| 0.4 | B | |||
| Combination Procedure: FLYWHEEL: Remove & Replace: | ||||
| 0.5 | C | |||
| Combination Procedure: OIL PUMP: Remove & Replace: | ||||
| 0.9 | B | |||
| Combination Procedure: SPEEDOMETER DRIVE GEAR: Remove & Replace: | ||||
| 3 Spd Trans | 0.6 | B | ||
| Combination Procedure: SPEEDOMETER DRIVEN GEAR: Remove & Replace: | ||||
| 3 Spd Trans | 0.7 | C | ||
| Combination Procedure: TORQUE CONVERTER: Remove & Replace: | ||||
| 0.3 | C | |||