Exiting Diagnostic Modes
Regular mode test is always active in ECC system. Only test mode can be selected by technicians. Disconnect test mode connector to exit test mode.
LIST OF ECM TROUBLE CODES
| Trouble Code |
Component Affected |
| 11 |
Ignition Pulse System
(Engine OFF) |
| 12 |
Ignition Pulse System
(Engine OFF) |
| 15 |
Ignition Pulse System
(Engine OFF) |
| 71 |
Ignition Pulse System
(Engine OFF) |
| 72 |
Ignition Pulse System
(Engine OFF) |
| 73 |
Ignition Pulse System
(Engine OFF) |
| 74 |
Ignition Pulse System
(Engine OFF) |
| 22 |
Speed Sensor |
| 23 |
O2Sensor |
| 24 |
Thermosensor |
| 25 |
Pressure Sensor |
| 32 |
Duty Solenoid Valve System |
| 33 |
Main System in Feedback System |
| 34 |
Back-Up System |
| 42 |
Clutch Switch System |
| 52 |
Air Suction Controlling Solenoid Valve |
| 53 |
Fuel Pump Control System |
| 54 |
Auto. Choke Control |
| 55 |
Shift-Up System |
| 62 |
EGR Solenoid Valve |
| 63 |
Canister Purge Solenoid Valve |
| 64 |
Vacuum Sensor Solenoid Valve |
| 65 |
Fuel Bowl Vent Solenoid Valve |