Grind Complete

Includes: R&I Engine Assembly (where noted). Remove carbon, check surfaces for warpage, reface or replace Valves, resurface Valve Seats, clean Valve Guides, adjust Valves.

Applies To	Note	Standard Hours	Warranty Hours	Skill Level
Normally Aspirated, Both		10.8		A
Additional Procedure: VALVE: Grind Complete:
	Refer to Additional Times following Cylinder Head Gasket - R&R.			A
Combination Procedure: CYLINDER HEAD STUD: Remove & Replace:
Each		0.1		B
Combination Procedure: VALVE GUIDE: Remove & Replace:
Each Additional		0.2		A
One		0.3		A