Fuel System: Carburetor: Reassembly

To reassemble, reverse disassembly procedure. See Fig 1 . Use new gaskets. Ensure primary and secondary barrel components are installed in original locations. Install piston return spring with hook facing downward.

Fig 1: Exploded View of Carburetor (Justy)

Courtesy of SUBARU OF AMERICA, INC.

NOTE: For all on-vehicle adjustment procedures not covered in this article, see ADJUSTMENTS article in the ENGINE PERFORMANCE Section.

NOTE: If fuel is not within mark on float chamber sight glass with engine idling, remove air horn and adjust using following procedures.