During "TROUBLE" Conditions

BASIC OPERATION OF SELF-DIAGNOSTIC SYSTEM - TROUBLE MENU

Engine & Connector Conditions

"CHECK ENGINE" Light should Be:

O2 Monitor Lamp Should Read:

Engine On, Read Memory Connector Disconnected, Test Mode Connector Disconnected

Trouble Code

Engine On, Read Memory Connector Connected, Test Mode Connector Disconnected

Trouble Code (Memory)

Engine On, Read Memory Connector Disconnected, Test Mode Connector Connected

⁽¹⁾ Off

Vehicle Specification Code Displayed

⁽¹⁾ On

Trouble Code

Engine Off, Ignition Switch On, Read Memory Connector Connected, Test Mode Connector Disconnected

Trouble Code (Memory)

Stall, Ignition Switch On, Read Memory Connector Disconnected, Test Mode Connector Disconnected

Trouble Code

Stall, Ignition Switch On, Read Memory Connector Disconnected, Test Mode Connector Connected

Trouble Code

Stall, Ignition Switch On, Read Memory Connector Connected, Test Mode Connector Connected

Trouble Code

⁽¹⁾	The indication is not changed until the engine is operated at a speed greater than 2000 RPM for at least 40 seconds.