Justy (PFI)
- Disconnect ignition coil 2-wire connector. Check primary resistance between coil terminals. See IGNITION COIL RESISTANCE table. If resistance is not as specified, replace coil.
- To check secondary resistance, connect ohmmeter between coil secondary tower and White/Black wire terminal of 2-wire connector. See IGNITION COIL RESISTANCE table. If resistance is not as specified, replace coil.
IGNITION COIL RESISTANCE (1)
| Application | Primary | Secondary | ||
|---|---|---|---|---|
| Justy | 0.81-0.99 | 8500-11,000 | ||
|
||||