Steering Column: Inspection
- Ensure "U" joint has no play. Flex "U" joint and check for binding. On Justy, replace "U" joint if torque required to turn exceeds 3 INCH lbs. (.4 N.m). On Legacy and Loyale, replace "U" joint if torque required to turn exceeds 4 INCH lbs. (.58 N.m).
- Check plastic washer for damage and serration for wear. Check steering shaft dimensions. See STEERING SHAFT SPECIFICATIONS
table. See Figure
. Replace steering shaft if it is not within specifications. Check bearings for damage. Replace any worn bearings.
STEERING SHAFT SPECIFICATIONS
| Application |
In. (mm) |
| Justy |
| Shaft Length |
22.76-22.84 (578.2-580.2) |
| Upper Shaft Runout |
.024 (0.60) |
| Lower Shaft Runout |
.047 (1.20) |
| Lock Collar Runout |
.024 (0.60) |
| Center Rotating Diameter |
1.28 (32.6) |
| Loyale |
| Shaft Length |
33.89-33.96 (860.7-862.7) |
| Upper Shaft Runout |
.024 (0.60) |
| Lower Shaft Runout |
.047 (1.20) |
| Lock Collar Runout |
.024 (0.60) |
| Center Rotating Diameter |
1.28 (32.6) |