LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 1995 >> SVX LSi >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Idle Control System >> By-Pass Air Control Valve
April 5, 2026: LEMON Manuals is launched! Read the announcement.

By-Pass Air Control Valve

  1. Turn ignition off. Unplug by-pass air control valve harness connector. By-pass air control valve is located near throttle body. Measure resistance between valve terminals No. 1 (White wire on mating connector) and No. 2 (Yellow/Red wire on mating connector). Resistance should be 9 ohms.
  2. Measure resistance between terminals No. 2 (Yellow/Red wire on mating connector) and No. 3 (Black wire on mating connector). Resistance should be 9 ohms. If resistance is not as specified, replace by-pass air control valve. See the TESTS W/CODES article for more detailed test procedures.
scientia non olet · About LEMON Manuals