Ignition Timing
- Ensure engine is at normal operating temperature and idle speed is correct. Set transaxle in Neutral (M/T) or Park (A/T) position. Connect timing light to No. 1 spark plug wire.
- Observe timing marks, located on crankshaft pulley. See the IGNITION TIMING table. If timing is not as specified, check self-diagnostic system for Diagnostic Trouble Codes (DTCs). Repair as necessary. See TESTS W/CODES article.
IGNITION TIMING (Degrees BTDC @ RPM)
| Application | Auto. Trans. | Man. Trans. |
|---|---|---|
| Legacy | 12-28 @ 700 | 6-22 @ 700 |