LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Forester S, Standard >> Repair and Diagnosis >> General Information >> Computer Relearn Procedures >> MAZDA >> Immobilizer System (626) >> Reprogram Error Recovery
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reprogram Error Recovery

  1. Using 1st key, start engine. After SECURITY light illuminates for 1-2 seconds, turn 1st key to LOCK position. Using 1st key, turn ignition to ON position, then LOCK position 5 times.
  2. Using 1st key, turn ignition to ON position. SECURITY light should illuminate. Turn 1st key to LOCK position and remove key. SECURITY light should go out.
  3. Using 2nd key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn 2nd key to LOCK position and remove key.
  4. Repeat step 3)  with 1st key. Repeat step 3)  with 3rd key. Repeat step 3)  with each new key, up to 8 keys total. Wait 30 seconds, program will quit automatically. After reprogramming is complete, clear DTCs with NGS tester.
scientia non olet · About LEMON Manuals