LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (A/T Control Systems) >> MT Gear Shift Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

MT Gear Shift Lever: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove gear shift knob.
  2. Remove console box. See REMOVAL .
  3. Remove boot plate from body.
    Fig 1: Removing Boot Plate From Body
    G02036918
  4. Remove rear exhaust pipe and muffler.
  5. Remove heat shield cover.
    Fig 2: Removing Heat Shield Cover
    G02036919
  6. Remove stay from transmission bracket.
    Fig 3: Removing Stay From Transmission Bracket
    G02036920
  7. Remove rod from joint.
    Fig 4: Removing Rod From Joint
    G02036921
  8. Remove cushion rubber from body.
    Fig 5: Removing Cushion Rubber From Body
    G02036922
  9. Remove joint and then extract straight pin.
    Fig 6: Removing Joint & Extracting Straight Pin
    G02036923
  10. Remove gear shift lever.
    Fig 7: Removing Gear Shift Lever
    G02036924
scientia non olet · About LEMON Manuals