LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (A/T Control Systems) >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prior to removal, set lever to "N" position.
  2. Remove under cover.
  3. Remove rear exhaust pipe and muffler.
    CAUTION: When removing exhaust pipes, be careful each exhaust pipe does not drop out.
  4. Remove heat shield cover.
    Fig 1: Removing Heat Shield Cover
    G02036904
  5. Remove Snap Pin from range select lever.
    Fig 2: Removing Snap Pin
    G02036905
  6. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly
    G02036906
  7. Disconnect cable from select lever and then remove cable bracket.
    Fig 4: Removing Select Cable
    G02036907
  8. Remove select cable from plate assembly.
scientia non olet · About LEMON Manuals