LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (A/T Control Systems) >> Select Lever >> Disassembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Disassembly

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove four washers and then detach rubber boot.
  2. Remove bolts and then remove cable bracket and plate.
    Fig 1: Removing Cable Bracket And Plate
    G02036899
  3. Twist the select lever grip and then remove select lever grip.
  4. Detach indicator cover.
  5. Disconnect connector and then remove solenoid assembly.
    Fig 2: Removing Solenoid Assembly
    G02036900
  6. Remove pattern plate.
  7. Remove stopper.
    Fig 3: Removing Pattern Plate & Stopper
    G02036901
  8. Tilt lever forward and pull down to separate it from frame.
    Fig 4: Separating Lever From Frame
    G02036902
  9. Remove spring.
    CAUTION: Wear goggles. Do not allow spring to fly out during removal.
  10. Remove bolt and then disconnect lever upper and lever lower.
    Fig 5: Disconnecting Upper & Lower Levers
    G02036903
scientia non olet · About LEMON Manuals