LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (A/T Control Systems) >> Select Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move the select lever to the "N" position.
  2. Remove rear exhaust pipe and muffler.
  3. Remove heat shield cover.
    Fig 1: Removing Heat Shield
    G02036893
  4. Disconnect cable from select lever and then remove cable bracket.
    Fig 2: Removing Cable Bracket
    G02036894
  5. Remove console box. See REMOVAL .
  6. Disconnect the connectors, then remove the four bolts to take out the selector lever assembly from the body.
    Fig 3: Removing The Four Bolts
    G02036895
scientia non olet · About LEMON Manuals