LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (A/T Control Systems) >> Service Procedure >> Gear Shift Lever >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Gear Shift Lever: Removal

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove gear shift knob.
  2. Remove front cover, see FRONT COVER - CENTER CONSOLE  .
  3. Remove console boot.
  4. Remove boot plate from body.
    Fig 1: Removing Console Boot & Boot Plate
    G02003699
  5. Remove rear exhaust pipe and muffler. See REAR EXHAUST PIPE .
    CAUTION: When removing exhaust pipes, make sure no exhaust pipes drop out.
    Fig 2: Removing Rear Exhaust Pipe And Muffler
    G02003700
  6. Remove heat shield cover.
    Fig 3: Removing Heat Shield Cover
    G02003701
  7. Remove stay from transmission bracket.
    Fig 4: Removing Stay From Transmission Bracket
    G02003702
  8. Remove rod from joint.
    Fig 5: Removing Rod From Joint
    G02003703
  9. Remove cushion rubber from body.
    Fig 6: Removing Cushion Rubber From Body
    G02003704
  10. Remove joint and then extract straight pin.
    Fig 7: Removing Joint & Extracting Straight Pin
    G02003705
  11. Remove gear shift lever.
    Fig 8: Removing Gear Shift Lever
    G02003706
scientia non olet · About LEMON Manuals