LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (A/T Control Systems) >> Service Procedure >> Select Cable >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Cable: Removal

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Prior to removal, set lever to "N" position.
  2. Remove under cover.
  3. Remove heat shield cover.
    Fig 1: Removing Heat Shield Cover
    G02003731
  4. Remove snap pin from range select lever.
    Fig 2: Removing Snap Pin From Range Select Lever
    G02003732
  5. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly From Transmission Case
    G02003733
  6. Disconnect cable from select lever and then remove cable bracket.
    Fig 4: Disconnecting Cable From Select Lever
    G02003734
  7. Remove select cable from plate assembly.
scientia non olet · About LEMON Manuals