Select Lever: Assembly

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Clean all parts before assembly.
Apply grease to each part (NIGTIGHT LYW No. 2 or equivalent). See Figure .
Assemble in the reverse order of disassembly.
NOTE:
- When installing the lock plate, be careful to position it in the correct direction.
  
  Fig 1: Installing Lock Plate
- Be careful to install the spring and button into the select lever grip in the correct direction.
  
  Fig 2: Installing Spring & Button Into Select Lever Grip
After completing the fitting, transfer the select lever to position "P"-"1", then check whether the indicator and select lever agree, whether the pointer and select lever agree, and what the operating force is.