LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (A/T Control Systems) >> Service Procedure >> Select Lever >> Inspection
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Select Lever: Inspection

WARNING: This page is about a different car, the 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect removed parts by comparing with new ones for deformation, damage and wear. Correct or replace if defective.
  2. Confirm the following parts for operating condition before assembly.
    1. Sliding condition of the button in the grip: it should move smoothly.
    2. Insertion of the grip on the select lever: when pushing the grip on the select lever by hand, screw holes should be aligned.
    3. Operation of select lever and rod: they should move smoothly.
  3. Check connection and disconnection while turning the "P" position switch to ON-OFF.
    Fig 1: Checking "P" Position Switch Operation
    G02003747
  4. Connect lead harness to connector terminal of shift-lock solenoid, and apply battery power to check whether the solenoid operates.
    Fig 2: Checking Shift-Lock Solenoid Operates
    G02003748
scientia non olet · About LEMON Manuals