Inhibitor Switch: Adjustment

Shift the select lever to the N range.
Loosen the three inhibitor switch securing bolts.
Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body.
ST 499267300 STOPPER PIN

Fig 1: Inserting (ST) As Vertical As Possible At Inhibitor Switch
Tighten the three inhibitor switch bolts.
Tightening torque: 3.4+/-0.5 N.m (0.35+/-0.05 kg-m, 2.5+/-0.4 ft-lb)
Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.