LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Forester L, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnostics >> Throttle Position Sensor >> Removal And Installation
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Removal And Installation

  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02001164
  2. Disconnect connector from throttle position sensor.
    Fig 2: Disconnecting Connector From Throttle Position Sensor
    G02001165
  3. Remove throttle position sensor holding screws, and remove it.
    Fig 3: Removing Throttle Position Sensor Holding Screws
    G02001166
  4. Install in the reverse order of removal.

    Tightening torque: 

    1. 2.2+/-0.2 N.m (0.22+/-0.02 kg-m, 1.6+/-0.1 ft-lb) 
    CAUTION: When installing throttle position sensor, adjust to the specified data.
    Fig 4: Tightening Fasteners To Specification After Adjustment
    G02001167
scientia non olet · About LEMON Manuals