LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control >> VDC Control Module (VDCCM) >> Adjustment >> Without SUBARU Select Monitor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Without SUBARU Select Monitor

  1. Park the vehicle in a straight ahead position on a horizontal surface.
  2. Confirm the steering wheel center position. (If the center position is not accurate, adjust wheel alignment.)
  3. Drive the vehicle approx. 10 km (6 MPH) preferably on a straight road, then turn ignition switch OFF. Then drive the vehicle approx. 10 km (6 MPH) again confirming that ABS and VDC warning lights do not go ON while vehicle is being driven. Also make sure there are no abnormalities of the VDC function or steering operation.
    NOTE: If it is not possible to drive the vehicle, use SUBARU SELECT MONITOR. See ADJUSTMENT  .

  4. If there are any abnormalities found, conduct the procedure over again.
scientia non olet · About LEMON Manuals