Measure slip ring outer wear. If worn greater than .04" (1.0 mm) for models equipped with 4-cylinder engine, or .024 (.6 mm) on models equipped with 6-cylinder, replace rotor. See SLIP RING STANDARD DIAMETER & WEAR LIMIT
table. Inspect slip rings for contamination or roughness. Polish with No. 500 or 600 emery paper or crocus cloth.SLIP RING STANDARD DIAMETER & WEAR LIMIT
| Application |
In. (mm) |
| Slip Ring Outer Diameter |
| 4-cylinder |
| Standard |
1.063 (27) |
| Wear Limit |
1.024 (26) |
| 6-cylinder |
| Standard |
.894 (22.7) |
| Wear Limit |
.870 (22.1) |