LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> Electrical >> Starter 2.5L >> Bench Testing >> No-Load Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

No-Load Test

  1. Clamp starter in starter bench tester. Connect test equipment to starter. See Fig 1 . Close switch to engage starter. Measure current draw, rotating speed, and voltage drop. See STARTER SPECIFICATIONS  . Repair or replace starter if performance is not as specified.
  2. Low rotating speed or excessive current draw may be caused by high friction rotating resistance because of worn bushings or improper assembly.
Fig 1: Testing Starter No-Load Performance (Typical)
G91F01158Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals