2.2L & 2.5L

Ensure engine is at normal operating temperature and idle speed is correct. Shift transaxle to Neutral (M/T) or Park (A/T) position. Connect timing light to No. 1 spark plug wire.

Observe timing marks, located on crankshaft pulley. See IGNITION TIMING SPECIFICATIONS table. If timing is not as specified, perform Basic Diagnostic Procedure. See SELF-DIAGNOSTICS article. Repair as necessary.

IGNITION TIMING SPECIFICATIONS ⁽¹⁾ (Degrees BTDC @ RPM)

Application

Auto. Trans.

Man. Trans.

2.2L & 2.5L

15 @ 700

10 @ 650

3.0L ⁽²⁾

10 @ 600

.....

⁽¹⁾	To improve stability, timing is controlled while engine is idling. Timing range is plus or minus 8 degrees (3 degrees on 3.0L).

⁽²⁾	Timing must be checked using a scan tool.