LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - 3.0L >> Diagnostic Tests >> DTC P0464: Fuel Level Sensor Circuit Intermittent Input
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0464: Fuel Level Sensor Circuit Intermittent Input

  1. Perform basic diagnostic procedure. See BASIC DIAGNOSTIC PROCEDURE  . If DTC P0464 is only DTC set, go to next step. If DTC P0462 or P0463 also exist, diagnose and repair those codes first.
  2. Remove fuel pump assembly from fuel tank. While moving fuel level sensor float up and down, measure resistance across terminals No. 3 and No. 6 of fuel level sensor. If resistance changes smoothly, go to next step. If resistance does not change smoothly, replace fuel level sensor.
  3. Remove fuel sub level sensor from fuel tank. While moving fuel sub level sensor float up and down, measure resistance across terminals No. 1 and No. 2 of fuel sub level sensor. If resistance changes smoothly, repair poor terminal contact in connectors between ECM and instrument cluster. If resistance does not change smoothly, replace fuel sub level sensor. Clear memory and perform verification procedure. See CLEARING DIAGNOSTIC TROUBLE CODES  and VERIFICATION PROCEDURE  .