Coding Engine Control Module (TT)
WARNING: This page does not describe the selected car, but rather 164 other vehicles, including the 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, 2002 Volvo S60, and 2002 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
Connect VAS 5051 or equivalent scan tool to Data Link Connector (DLC). DLC is located behind cover under left side of steering column. Turn ignition on. On scan tool, select vehicle system 01 - ENGINE ELECTRONICS. From selection 1, select diagnostic function 07 - CODE CONTROL MODULE. Press "Q" button to confirm input. Following scan tool instructions, access ECM coding information. Enter ECM code as necessary. For ECM coding options, see ENGINE CONTROL MODULE CODING OPTIONS (TT) table.
ENGINE CONTROL MODULE CODING OPTIONS (TT)
| Application/Code | Option | |||
|---|---|---|---|---|
| Country/Emissions | ||||
| 07 | (1) USA LEV | |||
| Drive/Additional Functions | ||||
| 4 | Front Wheel Drive Without Electronic Stability Program | |||
| 5 | Front Wheel Drive With Anti-Slip Regulation | |||
| 6 | All Wheel Drive Without Electronic Stability Program | |||
| 7 | All Wheel Drive With Electronic Stability Program | |||
| Transmission | ||||
| 0 | 5-Speed Manual Transmission | |||
| 1 | 6-Speed Manual Transmission | |||
| Vehicle Type | ||||
| 0 | TT | |||
|
||||