Reprogram Error Recovery
WARNING: This page does not describe the selected car, but rather 164 other vehicles, including the 2002 Volvo V70, 2002 Volvo V40, 2002 Volvo S80, 2002 Volvo S60, and 2002 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
- Using first key, start engine. After SECURITY light illuminates for 1-2 seconds, turn first key to LOCK position. Using first key, turn ignition switch to ON position, then LOCK position 5 times. DO NOT leave key in either position for more than one second.
- Using first key, turn ignition switch to ON position. SECURITY light should illuminate. Turn first key to LOCK position and remove key. SECURITY light should go out.
- Using second key, start engine. SECURITY light should illuminate for 1-2 seconds and engine should continue to run. Turn second key to LOCK position and remove key.
- Repeat step 3 with first key. Repeat step 3 with third key, then with each new key, up to 8 keys total. Waiting seconds will cause program to quit automatically. After reprogramming is complete, clear DTCs with NGS tester.