Fuel Injector(s)
WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, 2003 Subaru Impreza, 2003 Subaru Forester, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
- Start and idle engine. Listen for clicking sound coming from each injector. If operating noise is not heard, check wiring connector, injector resistance, and injection signal from computer.
- Turn ignition off. Unplug connector from each injector. Check injector resistance. Resistance should be 5-20 ohms. If resistance is not to specification, replace injector.