Select Lever: Disassembly

WARNING: This page is about a different car, the 2003 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Remove the grip.
Remove the indicator light and then remove the indicator cover.
NOTE: Be careful not to break the indicator light during removal.

Fig 1: Removing Indicator Light
Courtesy of SUBARU OF AMERICA, INC.
Remove the blind.
Remove the clips and then remove the guide plate.

Fig 2: Removing Clips & Guide Plates
Courtesy of SUBARU OF AMERICA, INC.
Remove the clamp, and shift lock solenoid.

Fig 3: Removing Shift Lock Solenoid
Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate.

Fig 4: Removing The Lock Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion plate.

Fig 5: Removing Cushion Plate
Courtesy of SUBARU OF AMERICA, INC.
Remove the clip and remove the "P" position switch.

Fig 6: Removing Clip & "P" Position Switch
Courtesy of SUBARU OF AMERICA, INC.
Remove the cap and then extract straight pin.

Fig 7: Removing Cap & Extracting Straight Pin
Courtesy of SUBARU OF AMERICA, INC.
Remove the select lever lower then take away the select lever upper from plate.

Fig 8: Removing Select Lever Lower & Taking Away Select Lever Upper
Courtesy of SUBARU OF AMERICA, INC.
Remove the spring and remove the detent arm.

Fig 9: Removing Spring & Detent Arm
Courtesy of SUBARU OF AMERICA, INC.
Remove the cushion.