Front Strut: Installation
- Install the strut mount at the upper side of strut to body, and tighten with nuts.
Tightening torque:
20 N.m (2.0 kgf-m, 14.5 ft-lb)
- Position aligning mark on camber adjustment bolt with aligning mark on lower side of strut.NOTE:
- While holding the head of adjusting bolt, tighten the self-locking nut.
- Be sure to use new self-locking nut.
Tightening torque:
152 N.m (15.5 kgf-m, 112.1 ft-lb)
- Install ABS sensor harness to strut.
Tightening torque:
32 N.m (3.3 kgf-m, 24.3 ft-lb)
- Install the bolts which secure the brake hose to strut.
Tightening torque:
32 N.m (3.3 kgf-m, 24.3 ft-lb)
- Install wheels.NOTE: Check wheel alignment and adjust if necessary.