LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2001 >> Outback Base, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Controls - System & Component Testing >> Computerized Engine Controls >> Electronic Control Module (ECM) >> Power Circuits (Cranking)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Power Circuits (Cranking)

  1. Using voltmeter, backprobe ECM connector crank signal terminal. See WIRING DIAGRAMS article. Hold ignition switch in START position. Battery voltage should exist between ECM terminal and ground only when ignition switch is in START position.
  2. If battery voltage does not exist, check fusible link. Fusible links are in engine compartment. If fusible link is okay, check for open wire between fusible link and ECM terminal or for defective ignition switch.
scientia non olet · About LEMON Manuals