Read Current Data

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
Press the [YES] key after displayed the information of transmission type.
On the << Transmission Diagnosis >> display screen, select the {Current Data Display & Save} and press the [YES] key.
On the << Data Display Menu >> display screen, select the {Data Display} and press the [YES] key.
Using the scroll key, move the display screen up or down until the desired data is shown.
- A list of the support data is shown in the following chart.
  
  Fig 1: Subaru Select Monitor Chart
  
  NOTE: For detailed operation procedure, refer to the SUBARU SELECT MONITOR OPERATION MANUAL. With 2.5 L engine, see SUBARU SELECT MONITOR (SSM) PROCEDURE . With 3.0 L engine, see SUBARU SELECT MONITOR (SSM) PROCEDURE .