LH Side

Release fuel pressure. Refer to RELEASING OF FUEL PRESSURE .
Open fuel flap lid, and remove fuel filler cap.
Disconnect battery ground cable.

Fig 1: Disconnecting Battery Ground Cable
Courtesy of SUBARU OF AMERICA, INC.
Remove two bolts which install washer tank on body.

Fig 2: Removing Washer Tank Bolts
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from front window washer motor.
Disconnect connector from rear gate glass washer motor.

Fig 3: Disconnecting Connector From Rear Gate Glass Washer Motor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect rear window glass washer hose from washer motor, then plug connection with a suitable cap.
Move washer tank, and secure it away from working area.

Fig 4: Moving Washer Tank
Courtesy of SUBARU OF AMERICA, INC.
Remove spark plug cords from spark plugs (#2 and #4 cylinders).
Disconnect connector from fuel injector

Fig 5: Disconnecting Connector From Fuel Injector
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which holds injector pipe to intake manifold.

Fig 6: Removing Injector Pipe Bolts (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 7: Removing Injector Pipe Bolts (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
Remove bolt which holds fuel pipe on the left side intake manifold.

Fig 8: Removing Fuel Pipe Bolts From Left Side Intake Manifold
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel injector from intake manifold.
1. Remove fuel injector securing clip.
  
  Fig 9: Removing Fuel Injector Securing Clip
  Courtesy of SUBARU OF AMERICA, INC.
2. Remove fuel injector while lifting up fuel injector pipe.
  
  Fig 10: Removing Fuel Injector
  Courtesy of SUBARU OF AMERICA, INC.