Select Cable: Installation

Install select cable to plate assembly.
Tightening torque: 32 N.m (3.3 kgf-m, 24 ft-lb)
Install select cable to range select lever.
Install plate assembly to transmission.
Tightening torque:
1. T: 24.5 N.m (2.5 kgf-m, 18.1 ft-lb)
Fig 1: Installing Plate Assembly To Transmission
Courtesy of SUBARU OF AMERICA, INC.
Install snap pin to range select lever.

Fig 2: Installing Snap Pin To Range Select Lever
Courtesy of SUBARU OF AMERICA, INC.
Move the select lever to the "N" position, then adjust the select cable position. ADJUSTMENT under Select Cable .
Install heat shield cover.

Fig 3: Installing Heat Shield Cover
Courtesy of SUBARU OF AMERICA, INC.