Select Lever: Removal

Set the vehicle on the lift.
Disconnect the ground terminal from battery.
Move the select lever to the "N" position.
Lift-up the vehicle.
Remove the rear exhaust pipe and muffler.
Remove the heat shield cover. (If equipped)
Disconnect the cable from select lever and then remove the cable bracket.

Fig 1: Disconnecting Cable From Select Lever And Removing Cable Bracket
Courtesy of SUBARU OF AMERICA, INC.
Lower the vehicle.
Remove the console box. < Ref. to REMOVAL , Console Box. >
Disconnect the connectors, then remove the four bolts to take out the select lever assembly from the body.

Fig 2: Removing Bolts To Take Out Select Lever Assembly From Body
Courtesy of SUBARU OF AMERICA, INC.