LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2003 >> Forester X, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) >> Fuel Injector >> Removal >> RH Side
April 5, 2026: LEMON Manuals is launched! Read the announcement.

RH Side

  1. Release the fuel pressure.

    Refer to RELEASING OF FUEL PRESSURE , OPERATION, Fuel.

  2. Open the fuel flap lid, and remove the fuel filler cap.
  3. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G02945252Courtesy of SUBARU OF AMERICA, INC.
  4. Remove the resonator chamber. Refer to REMOVAL , Resonator Chambers.
  5. Remove the spark plug cords from the spark plugs (#1 and #3 cylinders).
    Fig 2: Identifying Spark Plug Cords For Removal
    G02945253Courtesy of SUBARU OF AMERICA, INC.
  6. Remove the power steering pump and tank from the brackets.
    1. Remove the front side V-belt. Refer to REMOVAL , V-belt.
    2. Remove the bolts which hold the power steering pipes onto the intake manifold protector.
      Fig 3: Identifying Bolts For Removal
      G02945254Courtesy of SUBARU OF AMERICA, INC.
    3. Remove the bolts which install the power steering pump to the bracket.
      Fig 4: Identifying Bolts For Removing
      G02945255Courtesy of SUBARU OF AMERICA, INC.
    4. Disconnect the connector from the power steering pump switch.
      Fig 5: Disconnecting Connector From Power Steering Pump Switch
      G02945256Courtesy of SUBARU OF AMERICA, INC.
    5. Remove the power steering tank from the bracket by pulling it upwards.
      Fig 6: Locating Power Steering Tank Bracket For Removal
      G02945257Courtesy of SUBARU OF AMERICA, INC.
    6. Place the power steering pump and tank on the right side wheel apron.
      Fig 7: Placing Power Steering Pump & Tank On Right Side Wheel Apron
      G02945258Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the fuel pipe protector RH.
    Fig 8: Removing Fuel Pipe Protector RH
    G02945259Courtesy of SUBARU OF AMERICA, INC.
  8. Disconnect the connector from fuel injector.
    Fig 9: Identifying Connector For Disconnection
    G02945260Courtesy of SUBARU OF AMERICA, INC.
  9. Remove the bolt which holds the injector pipe to the intake manifold.
    Fig 10: Locating Bolts For Removal
    G02945261Courtesy of SUBARU OF AMERICA, INC.
    Fig 11: Locating Bolts For Removal
    G02945262Courtesy of SUBARU OF AMERICA, INC.
  10. Remove the fuel injector from the intake manifold.
    1. Remove the fuel injector securing clip.
      Fig 12: Locating Fuel Injector Securing Clip For Removal
      G02945263Courtesy of SUBARU OF AMERICA, INC.
    2. Remove the fuel injector while lifting up the fuel injector pipe.
    Fig 13: Removing Fuel Injector While Lifting Up Fuel Injector Pipe
    G02945264Courtesy of SUBARU OF AMERICA, INC.