Outer Mirror: Replacement
- Remove the outer mirror assembly. < Ref. to , REMOVAL , Outer Mirror Assembly. >
- Warm the area around the mirror holder (A) with a hair drier until the edges of the mirror holder become soft (about 2 or 3 minutes with a 1,000 W drier.)
- Use a flat-bladed screwdriver without sharp edges to lift the mirror out of the mirror holder (A). (Also remove the connector from the back of mirrors with heaters.)
- Warm the area around the mirror holder (A) with a hair drier until the edges of the mirror holder (A) become soft (about 2 or 3 minutes with a 1,000 W drier.)
- With heater models, connect the connector on the back of mirror.
- Remove the backing of the new two-sided tape, and push the mirror in to install it.CAUTION: Unless the mirror holder is warmed sufficiently, the mirror holder edges may be damaged or the mirror cracked.