Front Door Glass: Removal
- Remove the front door trim. < Ref. to REMOVAL , Door Trim. >
- Remove the sealing cover.
- Remove the outer mirror assembly. < Ref. to Outer Mirror Assembly . >
- Remove the clip (A), and remove the front end of weather strip.
- Remove the gusset.
- Remove the stabilizer.
- Remove the clips (A), and remove the rear end of weather strip.
- Remove the screw (A) from the rear end of weather strip outer to remove weather strip outer.
- Remove the screws to remove guide assembly.
- Operate the power window switch to move glass to position shown in Fig 6 , and then remove the two nuts through service holes.
- Remove the door glass.
CAUTION:
- Since the gear may be disengaged, do not turn regulator in the closing direction after removal of the glass.
- Avoid impact and damage to the glass.