RH Side
Install in the reverse order of removal.
Tightening torque (Spark plug):
21 N.m (2.1 kgf-m, 15.2 ft-lb)
Tightening torque (Ignition coil):
16 N.m (1.6 kgf-m, 11.7 ft-lb)
NOTE:
The above torque should be only applied to new spark plugs without oil on their threads.
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.
In case their threads are lubricated, the torque should be reduced by approx. 1/3 of the specified torque in order to avoid over-stressing.