With SUBARU Select Monitor

CAUTION: Check that the wiper deicer timer is in initial setting or customize setting before inspection.

STEP CHECK LIST

Step	Check	Yes	No
1. CHECK INPUT SIGNAL TO BODY INTEGRATED UNIT. When the wiper deicer switch is operated, check the input signal using Subaru Select Monitor. Connect the Subaru Select Monitor to data link connector. Turn the ignition switch to ON. Select {Body Integrated Unit} from << Main Menu <<. Select {Current Data Display & Save}. When the wiper deicer switch is set to ON, check the input signal.	After the wiper deicer switch is set to ON, does it turn to OFF in 15 minutes? Or does it operates continuously?	END.	Replace the body integrated unit. < Ref. to REMOVAL , Body Integrated Unit. >

Step

Check

Yes

1. CHECK INPUT SIGNAL TO BODY INTEGRATED UNIT.

When the wiper deicer switch is operated, check the input signal using Subaru Select Monitor.

After the wiper deicer switch is set to ON, does it turn to OFF in 15 minutes? Or does it operates continuously?

END.

Replace the body integrated unit. < Ref. to REMOVAL , Body Integrated Unit. >