Fuel Sub Level Sensor: Removal

WARNING:

Place "NO FIRE" signs near the working area.
Be careful not to spill fuel on the floor.
During work procedures, if fuel tank is more than 3/4 full, be careful because fuel may spill.

Drain fuel from fuel tank.
< Ref. to DRAINING FUEL , OPERATION, FUEL. >
Remove rear seat.
Remove service hole cover.

Fig 1: Identifying Sub Service Hole Cover
Courtesy of SUBARU OF AMERICA, INC.
Disconnect connector from fuel sub level sensor.

Fig 2: Disconnecting Connector From Fuel Sub Level Sensor
Courtesy of SUBARU OF AMERICA, INC.
Disconnect fuel jet pump hose.

Fig 3: Disconnecting Fuel Jet Pump Hose
Courtesy of SUBARU OF AMERICA, INC.
Remove bolts which install fuel sub level sensor on fuel tank.

Fig 4: Identifying Fuel Sub Level Sensor Bolts
Courtesy of SUBARU OF AMERICA, INC.
Remove fuel sub level sensor.