LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Baja Base, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Speed Control Systems (H4SO) >> Accelerator Control Cable >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Accelerator Control Cable: Installation

  1. Install in the reverse order of removal.
  2. Apply grease to the point (accelerator cable end on engine side) shown in Fig 1.

    Part No. 004404002 (Slico lube G-30M)

    Fig 1: Applying Grease To Accelerator Cable End
    G04988616Courtesy of SUBARU OF AMERICA, INC.
    CAUTION:
    • If cable clamp is damaged, replace it with a new one.
    • Never fail to cover outer cable end with boot.
    • Be careful not to kink accelerator cable.
    • Do not apply grease except for special area.
  3. Adjustment after pedal installation < Ref. to INSTALLATION , Accelerator Pedal. >
scientia non olet · About LEMON Manuals