Fuel Sub Level Sensor: Installation

Install in the reverse order of removal.

NOTE:

Use a new gasket.
Make sure the sealing portion is free from fuel or foreign matter before installation.
Align the protrusion (A) of gasket with the position shown in the figure.
Align the protrusion (B) of fuel sub level sensor with the cutout on the upper plate of fuel sub level sensor.
Tighten the nuts and bolts to the specified torque in the order as shown in the figure.

Tightening torque: 4.4 N.m (0.45 kgf-m, 3.2 ft-lb)

Fig 1: Identifying Tightening Sequence Of Fuel Sub Level Sensor Nuts And Bolts

Fig 2: Locating Fuel Sub Level Sensor Nuts And Bolts