LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Fuel Sub Level Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Sub Level Sensor: Removal

WARNING:
  • Place "NO FIRE" signs near the working area.
  • Be careful not to spill fuel.
  1. Drain fuel. < Ref. to DRAINING FUEL , PROCEDURE, Fuel. >
  2. Remove the rear seat.
  3. Remove the service hole cover.
    1. Remove bolt (A).
    2. Push the grommet (B) down and remove the service hole cover.
      Fig 1: Locating Service Hole Cover Bolt And Grommet
      G05016866
  4. Disconnect the connector from fuel sub level sensor.
    Fig 2: Locating Fuel Sub Level Sensor Connector
    G05018572
  5. Disconnect the quick connector, then disconnect the fuel delivery hose, return hose and jet pump hose. < Ref. to REMOVAL , Fuel Delivery, Return and Evaporation Lines. >
  6. Remove the nuts and bolts which install fuel sub level sensor on fuel tank.
    Fig 3: Identifying Fuel Sub Level Sensor Nuts And Bolts
    G05018573
  7. Remove the fuel sub level sensor.
scientia non olet · About LEMON Manuals