Intake Manifold: Installation

Install the intake manifold onto cylinder heads.
NOTE: Use new O-rings.

Tightening torque: 25 N.m (2.5 kgf-m, 18 It-lb)
- RH side
  
  Fig 1: Locating Intake Manifold Bolts (RH Side)
- LH side
  
  Fig 2: Locating Intake Manifold Bolts (LH Side)
Install the bolts which hold fuel injector pipe RH to cylinder head.
Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 3: Locating Bolts Holding Fuel Injector Pipe RH To Cylinder Head
Install the engine harness to fuel injector pipe RH.
Install the fuel pipe protector RH.
Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 4: Locating Fuel Pipe Protector RH Bolts
Install the bolts which hold fuel injector pipe LH to cylinder head.
Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 5: Locating Bolts Holding Fuel Injector Pipe LH To Cylinder Head
Install the engine harness to fuel injector pipe LH.
Install the fuel pipe protector LH.
Tightening torque: 19 N.m (1.9 kgf-m, 14 ft-lb)

Fig 6: Locating Fuel Pipe Protector LH Bolts
Connect the fuel hoses to fuel pipe.

Fig 7: Identifying Fuel Hoses
Connect the brake booster hose.

Fig 8: Locating Brake Booster Hose
Connect the PCV hose.

Fig 9: Locating PCV Hose
Connect the engine coolant hoses to throttle body.

Fig 10: Locating Engine Coolant Hoses
Connect the connector (A) to throttle body.

Fig 11: Identifying Connector And Engine Harness Connector
Connect the engine harness connector (B).
Install the generator. < Ref. to INSTALLATION , Generator. >
Install the air cleaner case and air intake chamber. < Ref. to INSTALLATION , Air Cleaner Case. > < Ref. to INSTALLATION , Air Intake Chamber. >
Install the fuse of fuel pump to main fuse box.
Connect the battery ground cable to the battery.

Fig 12: Connecting Ground Cable To Battery
Install the collector cover.