LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2006 >> Outback R >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection (Fuel Systems) (H6DO) >> Intake Manifold >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Intake Manifold: Removal

  1. Remove the collector cover.
  2. Release the fuel pressure. < Ref. to RELEASING OF FUEL PRESSURE , PROCEDURE, Fuel. >
  3. Open the fuel filler flap lid, and remove the fuel filler cap.
  4. Disconnect the ground cable from battery.
    Fig 1: Disconnecting Ground Cable From Battery
    G05019586
  5. Remove the air cleaner case and air intake chamber. < Ref. to REMOVAL , Air Cleaner Case. > < Ref. to REMOVAL , Air Intake Chamber. >
  6. Remove the generator. < Ref. to REMOVAL , Generator. >
  7. Disconnect the connector (A) from throttle body.
    Fig 2: Identifying Connector And Engine Harness Connector
    G05018403
  8. Disconnect the engine harness connector (B).
  9. Disconnect the engine coolant hoses from throttle body.
    Fig 3: Locating Engine Coolant Hoses
    G05018404
  10. Disconnect the PCV hose.
    Fig 4: Locating PCV Hose
    G05018405
  11. Disconnect the brake booster hose.
    Fig 5: Locating Brake Booster Hose
    G05018406
  12. Disconnect the fuel hoses from fuel pipe.
    1. Disconnect the connector of fuel pipe by pushing the ST in the direction of arrow.

      ST 42099AE000 CONNECTOR REMOVER

    2. Remove the clip and disconnect the evaporation hose from the pipe.
    WARNING:
    • Be careful not to spill fuel.
    • Catch the fuel from hoses using a container or cloth.
      Fig 6: Disconnecting Connector Of Fuel Pipe
      G05018407
  13. Remove the fuel pipe protector LH.
    Fig 7: Locating Fuel Pipe Protector LH Bolts
    G05018408
  14. Remove the engine harness from fuel injector pipe LH.
  15. Remove the bolts which hold fuel injector pipe LH to cylinder head.
    Fig 8: Locating Bolts
    G05018409
  16. Remove the fuel pipe protector RH.
    Fig 9: Locating Fuel Pipe Protector RH Bolts
    G05018410
  17. Remove the engine harness from fuel injector pipe RH.
  18. Remove the bolts which hold the fuel injector pipe RH to the cylinder head.
    Fig 10: Locating Bolts Holding Fuel Injector Pipe RH To Cylinder Head
    G05018411
  19. Remove the bolts which hold the intake manifold to the cylinder head.
    • LH side
      Fig 11: Locating Bolts Holding Intake Manifold To Cylinder Head (LH Side)
      G05018412
    • RH side
      Fig 12: Locating Bolts Holding Intake Manifold To Cylinder Head (RH Side)
      G05018413
  20. Remove the intake manifold.
scientia non olet · About LEMON Manuals