Learning Control: Procedure
- Turn the ignition switch to ON.
- Turn the A/C switch to OFF.
- Turn the headlight switch to OFF.
- Turn the rear defogger switch to OFF.
- Start the engine.
- Connect the Subaru Select Monitor to the vehicle.
- Drive the vehicle for 5 - 10 km (3 - 6 mile) to warm up ATF temperature more than 70°C (158°F).
- While checking that the throttle opening angle on Subaru Select Monitor is within the specified range, shift the gear from 1st → 2nd, 2nd → 3rd, and 3rd → 4th, while driving the vehicle at "D" range. < Ref. to
READ CURRENT DATA , OPERATION, Subaru Select Monitor. >
Acceleration opening angle:
Turbo model: 10% ± 2%
Non-turbo model: 12.5% ± 2%
- While checking that the throttle opening angle on Subaru Select Monitor is within the specified range, upshift the gear from 4th → 5th while driving the vehicle at "D" range.
Acceleration opening angle:
Turbo model: 12.5% ± 2%
Non-turbo model: 15.5% ± 2%
- Repeat the steps 8) and 9) until the reducing effect of the shifting shock is felt.
- If reducing of shifting shock is not felt after 5 cycles, recheck that the learning conditions (throttle opening angle, ATF temperature, etc.) are as specified and recheck that other parts are normal.